ENDURA-TUF^® 2000, (ET-2000) IS A PROCESS (U.S. PATENT No. 5,532,281) USING 100 PERCENT SOLIDS, SOLVENTLESS, MULTI-COMPONENT COMPOSITE MATERIALS DESIGNED TO MORE FULLY UTILIZE THE ECOSYSTEM^® TECHNOLOGY, TO INCLUDE THE INJECTION OF SOLID FILLER COMPONENTS SUCH AS SAND, CHOPPED FIBERGLASS, GROUND RUBBER, GROUND GLASS, AND OTHER TYPES OF FILLER TO YIELD DIFFERENT PHYSICAL PROPERTIES AT DENSITIES EXCEEDING THE SOLID RESIN MATERIALS.

ET-2000 PROCESS  WITH SELECT GRADED SILICA SAND WAS DEVELOPED TO OFFER HIGH DENSITY PRODUCTS AS CHEMICAL RESISTANT, PROTECTIVE, OR SECONDARY CONTAINMENT LINING SYSTEMS FOR AREAS REQUIRING A HIGH-COMPRESSIVE STRENGTH (IMPACT RESISTANCE), SUCH AS DRUM STORAGE, FORKLIFT, VEHICULAR, OR HEAVY EQUIPMENT TRAFFIC AND ADHERE VERY WELL TO CONCRETE, WOOD, ASPHALT, AND METAL SURFACES.

ET-2000 PROCESS UTILIZES A PRESSURE VESSEL (BLAST POT) FOR THE INJECTION OF FILLERS AT THE SPRAY NOZZLE, ELIMINATING ABRASIVE PUMP WEAR. THE AMOUNT OF FILLERS BEING INJECTED INTO THE SPRAY APPLIED MATERIAL CAN BE REGULATED ON AN "AS NEEDED" BASIS FOR DENSITY CONTROL.

ET-2000 PROCESS  ALLOWS LICENSED CONTRACTORS TO SPRAY APPLY ENDURA-FLEX^®  MATERIALS WITH HIGH LOADS OF FILLERS ONTO SUBSTRATES THAT HAVE BEEN TRADITIONALLY "UNCOATABLE." ET-2000 PROCESS GIVES A CONTINUOUS, UNIFORM, AND INSTANTANEOUS BLEND OF COMPOSITE MATERIALS, INCREASING PRODUCTION RATES AND DECREASING MANPOWER REQUIREMENTS NORMALLY ASSOCIATED WITH HAND-MIXED AND HAND-APPLIED EPOXY COMPOSITE SYSTEMS.